SYLLABUS AND EXAMINATION PLANING FOR JEE MAIN

JOINT ENTRANCE EXAMINATION

Joint Entrance Examination (JEE) is an engineering entrance examination conducted for admission to various engineering colleges in India. It is constituted by two different examinations – JEE Main and JEE Advanced. The exams are of the objective pattern. JEE Advanced is regarded internationally as one of the most challenging undergraduate admission tests.

The Joint Seat Allocation Authority (JoSAA) conducts the joint admission process for a total of 23 Indian Institute of Technology campuses, 32 National Institute of Technology campuses, 18 Indian Institute of Information Technology campuses, Indian School of Mines and 19 other Government Funded Technical Institutes (GFTIs) based on the rank obtained by a student in JEE Mains and JEE Advanced.

JEE MAIN EXAM PATTERN 2021:

JEE Main mainly consists of two papers and is usually conducted in two sessions in the month of January and April and in two shifts – morning and evening. The general layout of the exam pattern for JEE Main is given below;

Particulars Paper 1 Paper 2 Paper 3
Mode Of The Exam Computer-based test Both online and offline Computer-based test
Number Of Sections Three sections comprising of Physics, Maths and Chemistry. Three sections consisting of Mathematics, Drawing, and Aptitude. Three sections consisting of Mathematics, Aptitude, and Planning based test.
Duration 3 hours 3 hours 3 hours
Number Of Questions 75 questions out of which 25 questions are asked from each section. Total of 77 questions where Maths consists of 25 questions, aptitude has 50 questions and drawing includes 2 questions. It will consist of a total of 100 questions where Mathematics will have 25 questions, Aptitude section will consist of 50 questions and the planning test will include 25 questions.
Question Types Multiple Choice Questions as well as numerical based questions. Objective type questions are asked for Maths and Aptitude.Questions to test drawing and sketching skills. Objective types MCQs and 5 questions in Maths will have an answer that should be filled as a numerical value. 
Total Marks 300 400 400
Language Of Paper Hindi and English. Gujarati is also included for candidates from some states. English, Hindi and Gujarati. English, Hindi and Gujarati.


DISTRIBUTION OF QUESTIONS AND MARKS

Paper-I

Subjects Questions Marks
Chemistry 25 100
Physics 25 100
Mathematics 25 100
Total 75 300

Paper-II

Subjects Questions Marks
Mathematics 25 100
Aptitude 50 200
Drawing 2 100
Total 77 400

Paper-III

Subjects Questions Marks
Mathematics 25 100
Aptitude 50 200
Planning 25 100
Total 100 400

 

:SYLLABUS OF EXAMINATION:

JEE MAIN PHYSICS SYLLABUS:

S.No.UnitsTopics
1Physics and MeasurementPhysics, technology and society, SI units, Fundamental and derived units. Least count, accuracy and precision of measuring instruments, Errors in measurement, Dimensions of Physical quantities, dimensional analysis and its applications,
2KinematicsFrame of reference. Motion in a straight line: Position-time graph, speed and velocity. Uniform and non-uniform motion, average speed and instantaneous velocity Uniformly accelerated motion, velocity-time, position-time graphs, relations for uniformly accelerated motion. Scalars and Vectors, Vector addition and Subtraction, Zero Vector, Scalar and Vector products, Unit Vector, Resolution of a Vector. Relative Velocity, Motion in a plane. Projectile Motion, Uniform Circular Motion.
3Laws of MotionForce and Inertia, Newton’s First Law of motion; Momentum, Newton’s Second Law of motion; Impulse; Newton’s Third Law of motion. Law of conservation of linear momentum and its applications, Equilibrium of concurrent forces.Static and Kinetic friction, laws of friction, rolling friction.Dynamics of uniform circular motion: Centripetal force and its applications,
4Work, Energy and PowerWork done by a constant force and a variable force; kinetic and potential energies, work-energy theorem, power.Potential energy of a spring, conservation of mechanical energy, conservative and non-conservative forces; Elastic and inelastic collisions in one and two dimensions.
5Rotational MotionCentre of mass of a two-particle system, Centre of mass of a rigid body; Basic concepts of rotational motion; moment of a force, torque, angular momentum, conservation of angular momentum and its applications; moment of inertia, radius of gyration. Values of moments of inertia for simple geometrical objects, parallel and perpendicular axes theorems and their applications. Rigid body rotation, equations of rotational motion.
6GravitationThe universal law of gravitation. Acceleration due to gravity and its variation with altitude and depth, Kepler’s laws of planetary motion. Gravitational potential energy; gravitational potential. Escape velocity. Orbital velocity of a satellite. Geo-stationary satellites.
7Properties of Solids and LiquidsElastic behaviour, Stress-strain relationship, Hooke’s Law, Young’s modulus, bulk modulus, modulus of rigidity. Pressure due to a fluid column; Pascal’s law and its applications. Viscosity, Stokes’ law, terminal velocity, streamline and turbulent flow, Reynolds number. Bernoulli’s principle and its applications. Surface energy and surface tension, angle of contact, application of surface tension – drops, bubbles and capillary rise. Heat, temperature, thermal expansion; specific heat capacity, calorimetry; change of state, latent heat. Heat transfer-conduction, convection and radiation, Newton’s law of cooling.
8ThermodynamicsThermal equilibrium, zeroth law of thermodynamics, concept of temperature. Heat, work and internal energy. First law of thermodynamics. Second law of thermodynamics: reversible and irreversible processes. Carnot engine and its efficiency.
9Kinetic Theory of GasesEquation of state of a perfect gas, work done on compressing a gas. Kinetic theory of gases-assumptions, concept of pressure. Kinetic energy and temperature: rms speed of gas molecules; Degrees of freedom, Law of equipartition of energy,applications to specific heat capacities of gases; Mean free path, Avogadro’s number.
10Oscillations and WavesPeriodic motion – period, frequency, displacement as a function of time. Periodic functions. Simple harmonic motion (S.H.M.) and its equation; phase; oscillations of a spring -restoring force and force constant; energy in S.H.M. – kinetic and potential energies; Simple pendulum – derivation of expression for its time period; Free, forced and damped oscillations, resonance.Wave motion. Longitudinal and transverse waves, speed of a wave. Displacement relation for a progressive wave. Principle of superposition of waves, reflection of waves, Standing waves in strings and organ pipes, fundamental mode and harmonics, Beats, Doppler effect in sound
11ElectrostaticsElectric charges: Conservation of charge, Coulomb’s law-forces between two point charges, forces between multiple charges; superposition principle and continuous charge distribution.Electric field: Electric field due to a point charge, Electric field lines, Electric dipole, Electric field due to a dipole, Torque on a dipole in a uniform electric field.Electric flux, Gauss’s law and its applications to find field due to infinitely long uniformly charged straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell. Electric potential and its calculation for a point charge, electric dipole and system of charges; Equipotential surfaces, Electrical potential energy of a system of two point charges in an electrostatic field.Conductors and insulators, Dielectrics and electric polarization, capacitor, combination of capacitors in series and in parallel, capacitance of a parallel plate capacitor with and without dielectric medium between the plates, Energy stored in a capacitor.
12Current ElectricityElectric current, Drift velocity, Ohm’s law, Electrical resistance, Resistances of different materials, V-I characteristics of Ohmic and non-ohmic conductors, Electrical energy and power, Electrical resistivity, Colour code for resistors; Series and parallel combinations of resistors; Temperature dependence of resistance.Electric Cell and its Internal resistance, potential difference and emf of a cell, combination of cells in series and in parallel. Kirchhoffs laws and their applications. Wheatstone bridge, Metre bridge. Potentiometer – principle and its applications.
13Magnetic Effects of Current and MagnetismBiot – Savart law and its application to current carrying circular loop. Ampere’s law and its applications to infinitely long current carrying straight wire and solenoid. Force on a moving charge in uniform magnetic and electric fields. Cyclotron.Force on a current-carrying conductor in a uniform magnetic field. Force between two parallel current-carrying conductors-definition of ampere, Torque experienced by a current loop in uniform magnetic field; Moving coil galvanometer, its current sensitivity and conversion to ammeter and voltmeter.Current loop as a magnetic dipole and its magnetic dipole moment. Bar magnet as an equivalent solenoid, magnetic field lines; Earth’s magnetic field and magnetic elements. Para-, dia- and ferro- magnetic substances.Magnetic susceptibility and permeability, Hysteresis, Electromagnets and permanent magnets.
14Electromagnetic Induction and Alternating CurrentsElectromagnetic induction; Faraday’s law, induced emf and current; Lenz’s Law, Eddy currents. Self and mutual inductance. Alternating currents, peak and rms value of alternating current/ voltage; reactance and impedance; LCR series circuit, resonance; Quality factor, power in AC circuits, wattless current. AC generator and transformer.
15Electromagnetic WavesElectromagnetic waves and their characteristics. Transverse nature of electromagnetic waves.Electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet, X-rays, gamma rays). Applications of e.m. waves.
16OpticsReflection and refraction of light at plane and spherical surfaces, mirror formula, Total internal reflection and its applications, Deviation and Dispersion of light by a prism, Lens Formula, Magnification, Power of a Lens, Combination of thin lenses in contact, Microscope and Astronomical Telescope (reflecting and refracting) and their magnifying powers.Wave optics: wavefront and Huygens’ principle, Laws of reflection and refraction using Huygen’s principle. Interference, Young’s double slit experiment and expression for fringe width, coherent sources and sustained interference of light. Diffraction due to a single slit, width of central maximum. Resolving power of microscopes and astronomical telescopes, Polarisation, plane polarized light; Brewster’s law, uses of plane polarized light and Polaroids.
17Dual Nature of Matter and RadiationDual nature of radiation. Photoelectric effect, Hertz and Lenard’s observations; Einstein’s photoelectric equation; particle nature of light. Matter waves-wave nature of particle, de Broglie relation. Davis son-Germer experiment.
18Atoms and NucleiAlpha-particle scattering experiment; Rutherford’s model of atom; Bohr model, energy levels, hydrogen spectrum. Composition and size of nucleus, atomic masses, isotopes, isobars; isotones. Radioactivity-alpha, beta and gamma particles/rays and their properties; radioactive decay law. Mass-energy relation, mass defect; binding energy per nucleon and its variation with mass number, nuclear fission and fusion.
19Electronic DevicesSemiconductors; semiconductor diode: I-V characteristics in forward and reverse bias; diode as a rectifier; 1-V characteristics of LED, photodiode, solar cell and Zener diode; Zener diode as a voltage regulator. Junction transistor, transistor action, characteristics of a transistor; transistor as an amplifier (common emitter configuration) and oscillator. Logic gates (OR, AND, NOT, NAND and NOR). Transistor as a switch.
20Communication SystemsPropagation of electromagnetic waves in the atmosphere; Sky and space wave propagation, Need for modulation, Amplitude and Frequency Modulation, Bandwidth of signals, Bandwidth of Transmission medium, Basic Elements of a Communication System (Block Diagram only).

 

JEE MAIN CHEMISTRY SYLLABUS

S.No. Units Topics
Section A – Physical Chemistry
1 Some Basic Concepts in Chemistry Matter and its nature, Dalton’s atomic theory; Concept of atom, molecule, element and compound; Physical quantities and their measurements in Chemistry, precision and accuracy, significant figures, S.I. Units, dimensional analysis; Laws of chemical combination: Atomic and molecular masses, mole concept, molar mass, percentage composition, empirical and molecular formulae; Chemical equations and stoichiometry.
2 States of Matter Classification of matter into solid, liquid and gaseous states.Gaseous State:Measurable properties of gases; Gas laws – Boyle’s law, Charle’s law, Graham’s law of diffusion, Avogadro’s law, Dalton’s law of partial pressure; Concept of Absolute scale of temperature; Ideal gas equation; Kinetic theory of gases (only postulates); Concept of average, root mean square and most probable velocities; Real gases, deviation from Ideal behaviour, compressibility factor and van der Waals equation.Liquid State:Properties of liquids – vapour pressure, viscosity and surface tension and effect of temperature on them (qualitative treatment only).Solid State:Classification of solids: molecular, ionic, covalent and metallic solids, amorphous and crystalline solids (elementary idea); Bragg’s Law and its applications; Unit cell and lattices, packing in solids (fee, bec and hep lattices), voids, calculations involving unit cell parameters, imperfection in solids; Electrical and magnetic properties.
3 Atomic Structure Thomson and Rutherford atomic models and their limitations; Nature of electromagnetic radiation, photoelectric effect; Spectrum of hydrogen atom, Bohr model of hydrogen atom – its postulates, derivation of the relations for energy of the electron and radii of the different orbits, limitations of Bohr’s model; Dual nature of matter, de-Broglie’s relationship, Heisenberg uncertainty principle. Elementary ideas of quantum mechanics, quantum mechanical model of atom, its important features. Concept of atomic orbitals as one electron wave functions; Variation of t|/ and \|/2 with r for Is and 2s orbitals; various quantum numbers (principal, angular momentum and magnetic quantum numbers) and their significance; shapes of s, p and d – orbitals, electron spin and spin quantum number; Rules for filling electrons in orbitals – aufbau principle, Pauli’s exclusion principle and Hund’s rule, electronic configuration of elements, extra stability of half-filled and completely filled orbitals.
4 Chemical Bonding and Molecular Structure Kossel – Lewis approach to chemical bond formation, concept of ionic and covalent bonds.Ionic Bonding: Formation of ionic bonds, factors affecting the formation of ionic bonds; calculation of lattice enthalpy.Covalent Bonding: Concept of electronegativity, Fajan’s rule, dipole moment; Valence Shell Electron Pair Repulsion (VSEPR) theory and shapes of simple molecules.Quantum mechanical approach to covalent bonding:Valence bond theory – Its important features, concept of hybridization involving s, p and d orbitals; Resonance.Molecular Orbital Theory – Its important features, LCAOs, types of molecular orbitals (bonding, antibonding), sigma and pi-bonds, molecular orbital electronic configurations of homonuclear diatomic molecules, concept of bond order, bond length and bond energy.Elementary idea of metallic bonding. Hydrogen bonding and its applications.
5 Chemical Thermodynamics Fundamentals of thermodynamics: System and surroundings, extensive and intensive properties, state functions, types of processes.First law of thermodynamics – Concept of work, heat internal energy and enthalpy, heat capacity, molar heat capacity; Hess’s law of constant heat summation; Enthalpies of bond dissociation, combustion, formation, atomization, sublimation, phase transition, hydration, ionization and solution.Second law of thermodynamics: Spontaneity of processes; AS of the universe and AG of the system as criteria for spontaneity, AG” (Standard Gibbs energy change) and equilibrium constant.
6 Solutions Different methods for expressing concentration of solution – molality, molarity, mole fraction, percentage (by volume and mass both), vapour pressure of solutions and Raoult’s Law – Ideal and non-ideal solutions, vapour pressure – composition, plots for ideal and non-ideal solutions; Colligative properties of dilute solutions – relative lowering of vapour pressure, depression of freezing point, elevation of boiling point and osmotic pressure; Determination of molecular mass using colligative properties; Abnormal value of molar mass, van’t Hoff factor and its significance.
7 Equilibrium Meaning of equilibrium, concept of dynamic equilibrium.Equilibria involving physical processes: Solid -liquid, liquid – gas and solid – gas equilibria, Henry’s law, general characteristics of equilibrium involving physical processes.Equilibria involving chemical processes: Law ofchemical equilibrium, equilibrium constants (Kp and Kc) and their significance, significance of AG and AG” in chemical equilibria, factors affecting equilibrium concentration, pressure, temperature, effect of catalyst; Le Chatelier’s principle.Ionic equilibrium: Weak and strong electrolytes, ionization of electrolytes, various concepts of acids and bases (Arrhenius, Bronsted – Lowry and Lewis) and their ionization, acid – base equilibria (including multistage ionization) and ionization constants, ionization of water, pH scale, common ion effect, hydrolysis of salts and pH of their solutions, solubility of sparingly soluble salts and solubility products, buffer solutions.
8 Redox Reactions and Electro-chemistry Electronic concepts of oxidation and reduction, redox reactions, oxidation number, rules for assigning oxidation number, balancing of redox reactions.Electrolytic and metallic conduction, conductance in electrolytic solutions, molar conductivities and their variation with concentration: Kohlrausch’s law and its applications.Electrochemical cells – Electrolytic and Galvanic cells, different types of electrodes, electrode potentials including standard electrode potential, half – cell and cell reactions, emf of a Galvanic cell and its measurement; Nernst equation and its applications; Relationship between cell potential and Gibbs’ energy change; Dry cell and lead accumulator; Fuel cells.
9 Chemical Kinetics Rate of a chemical reaction, factors affecting the rate of reactions: concentration, temperature, pressure and catalyst; elementary and complex reactions, order and molecularity of reactions, rate law, rate constant and its units, differential and integral forms of zero and first order reactions, their characteristics and half -lives, effect of temperature on the rate of reactions -Arrhenius theory, activation energy and its calculation, collision theory of bimolecular gaseous reactions (no derivation).
10 Surface Chemistry Adsorption- Physisorption and chemisorption and their characteristics, factors affecting adsorption of gases on solids – Freundlich and Langmuir adsorption isotherms, adsorption from solutions.Catalysis – Homogeneous and heterogeneous, activity and selectivity of solid catalysts, enzyme catalysis and its mechanism.Colloidal state- distinction among true solutions, colloids and suspensions, classification of colloids -lyophilic, lyophobic; multimolecular, macromolecular and associated colloids (micelles), preparation and properties of colloids – Tyndall effect, Brownian movement, electrophoresis, dialysis, coagulation and flocculation; Emulsions and their characteristics.
Section B – Inorganic Chemistry
11 Classification of Elements and Periodicity in Properties Modem periodic law and present form of the periodic table, s, p, d and f block elements, periodic trends in properties of elements atomic and ionic radii, ionization enthalpy, electron gain enthalpy, valence, oxidation states and chemical reactivity.
12 General Principles and Processes of Isolation of Metals Modes of occurrence of elements in nature, minerals, ores; Steps involved in the extraction of metals -concentration, reduction (chemical and electrolytic methods) and refining with special reference to the extraction of Al, Cu, Zn and Fe; Thermodynamic and electrochemical principles involved in the extraction of metals.
13 Hydrogen Position of hydrogen in periodic table, isotopes, preparation, properties and uses of hydrogen; Physical and chemical properties of water and heavy water; Structure, preparation, reactions and uses of hydrogen peroxide; Classification of hydrides – ionic, covalent and interstitial; Hydrogen as a fuel.
14 S – Block Elements (Alkali and Alkaline Earth Metals) Group -1 and 2 ElementsGeneral introduction, electronic configuration and general trends in physical and chemical properties of elements, anomalous properties of the first element of each group, diagonal relationships.Preparation and properties of some important compounds – sodium carbonate and sodium hydroxide and sodium hydrogen carbonate; Industrial uses of lime, limestone, Plaster of Paris and cement; Biological significance of Na, K, Mg and Ca.
15 p- Block Elements Group -13 to Group 18 Elements General Introduction: Electronic configurations and general trends in physical and chemical properties of elements across the periods and down the groups; unique behaviour of the first element in each group.Groupwise study of the p – block elements Group -13Preparation, properties and uses of boron and aluminium; Structure, properties and uses of borax, boric acid, diborane, boron trifluoride, aluminium chloride and alums. Group -14Tendency for catenation; Structure, properties and uses of Allotropes and oxides of carbon, silicon tetrachloride, silicates, zeolites and silicones. Group -15Properties and uses of nitrogen and phosphorus; Allotropic forms of phosphorus; Preparation, properties, structure and uses of ammonia, nitric acid, phosphine and phosphorus halides, (PC13, PCI,); Structures of oxides and oxoacids of nitrogen and phosphorus. Group -16Preparation, properties, structures and uses of ozone; Allotropic forms of sulphur; Preparation, properties, structures and uses of sulphuric acid (including its industrial preparation); Structures of oxoacids of sulphur. Group -17Preparation, properties and uses of hydrochloric acid; Trends in the acidic nature of hydrogen halides; Structures of Interhalogen compounds and oxides and oxoacids of halogens. Group-18Occurrence and uses of noble gases; Structures of fluorides and oxides of xenon.
16 d – and f – Block Elements Transition ElementsGeneral introduction, electronic configuration, occurrence and characteristics, general trends in properties of the first row transition elements -physical properties, ionization enthalpy, oxidation states, atomic radii, colour, catalytic behaviour, magnetic properties, complex formation, interstitial compounds, alloy formation; Preparation, properties and uses of K2 Cr, 07 and Kmn04. Inner Transition ElementsLanthanoids – Electronic configuration, oxidation states and lanthanide contraction.Actinides – Electronic configuration and oxidation states.
17 Co-Ordination Compounds Introduction to co-ordination compounds, Werner’s theory; ligands, co-ordination number, denticity, chelation; IUPAC nomenclature of mononuclear coordination compounds, isomerism; Bonding-Valence bond approach and basic ideas of Crystal field theory, colour and magnetic properties; Importance of co­ordination compounds (in qualitative analysis, extraction of metals and in biological systems).
18 Environmental Chemistry Environmental pollution – Atmospheric, water and soil.Atmospheric pollution – Tropospheric and StratosphericTropospheric pollutants – Gaseous pollutants: Oxides of carbon, nitrogen and sulphur, hydrocarbons; their sources, harmful effects and prevention; Green house effect and Global warming; Acid rain;Particulate pollutants: Smoke, dust, smog, fumes, mist; their sources, harmful effects and prevention.Stratospheric pollution- Formation and breakdown of ozone, depletion of ozone layer – its mechanism and effects.Water Pollution – Major pollutants such as, pathogens, organic wastes and chemical pollutants; their harmful effects and prevention.Soil pollution – Major pollutants such as: Pesticides (insecticides, herbicides and fungicides), their harmful effects and prevention.Strategies to control environmental pollution.
Section C – Organic Chemistry
19 Purification and Characterization of Organic Compounds Purification – Crystallization, sublimation, distillation, differential extraction and chromatography – principles and their applications.Qualitative analysis – Detection of nitrogen, sulphur, phosphorus and halogens.Quantitative analysis (basic principles only)- Estimation of carbon, hydrogen, nitrogen, halogens, sulphur, phosphorus.Calculations of empirical formulae and molecular formulae; Numerical problems in organic quantitative analysis.
20 Some Basic Principles of Organic Chemistry Tetravalency of carbon; Shapes of simple molecules -hybridization (s and p); Classification of organic compounds based on functional groups: and those containing halogens, oxygen, nitrogen and sulphur; Homologous series; Isomerism – structural and stereoisomerism. Nomenclature (Trivial and IUPAC)Covalent bond fission – Homolytic and heterolytic: free radicals, carbocations and carbanions; stability of carbocations and free radicals, electrophiles and nucleophiles. Electronic displacement in a covalent bond- Inductive effect, electromeric effect, resonance and hyperconjugation. Common types of organic reactions- Substitution, addition, elimination and rearrangement.
21 Hydrocarbons Classification, isomerism, IUPAC nomenclature, general methods of preparation, properties and reactions. Alkanes – Conformations: Sawhorse and Newman projections (of ethane); Mechanism of halogenation of alkanes.Alkenes – Geometrical isomerism; Mechanism of electrophilic addition: addition of hydrogen, halogens, water, hydrogen halides (Markownikoff s and peroxide effect); Ozonolysis and polymerization.Alkynes – Acidic character; Addition of hydrogen, halogens, water and hydrogen halides; Polymerization.Aromatic hydrocarbons – Nomenclature, benzene -structure and aromaticity; Mechanism of electrophilic substitution: halogenation, nitration, Friedel – Craft’s alkylation and acylation, directive influence of functional group in mono-substituted benzene.
22 Organic Compounds Containing Halogens General methods of preparation, properties and reactions; Nature of C-X bond; Mechanisms of substitution reactions.Uses; Environmental effects of chloroform, iodoform freons and DDT.
23 Organic Compounds Containing Oxygen General methods of preparation, properties, reactions and uses. ALCOHOLS, PHENOLS AND ETHERS Alcohols: Identification of primary, secondary and tertiary alcohols; mechanism of dehydration.Phenols: Acidic nature, electrophilic substitution reactions: halogenation, nitration and sulphonation, Reitner – Tiemann reaction.Ethers: Structure.Aldehyde and Ketones: Nature of carbonyl group;Nucleophilic addition to >C=0 group, relative reactivities of aldehydes and ketones; Important reactions such as – Nucleophilic addition reactions (addition of HCN, NH, and its derivatives), Grignard reagent; oxidation; reduction (Wolff Kishner and Clemmensen); acidity of a-hydrogen, aldol condensation, Cannizzaro reaction, Haloform reaction;Chemical tests to distinguish between aldehydes and Ketones.Carboxylic AcidsAcidic strength and factors affecting it.
24 Organic Compounds Containing Nitrogen General methods of preparation, properties, reactions and uses.Amines: Nomenclature, classification, structure, basic character and identification of primary, secondary and tertiary amines and their basic character.Diazonium Salts: Importance in synthetic organic chemistry.
25 Polymers General introduction and classification of polymers, general methods of polymerization-addition and condensation, copolymerization;Natural and synthetic rubber and vulcanization; some important polymers with emphasis on their monomers and uses – polythene, nylon, polyester and bakelite.
26 Biomolecules General introduction and importance of biomolecules.Carbohydrates – Classification: aldoses and ketoses; monosaccharides (glucose and fructose) and constituent monosaccharides of oligosaccharides (sucrose, lactose and maltose).Proteins – Elementary Idea of a-amino acids, peptide bond, polypeptides; Proteins: primary, secondary, tertiary and quaternary structure (qualitative idea only), denaturation of proteins, enzymes.Vitamins – Classification and functions.Nucleic Acids – Chemical constitution of DNA and RNA.Biological functions of nucleic acids.
27 Chemistry In Everyday Life Chemicals in medicines – Analgesics, tranquilizers, antiseptics, disinfectants, antimicrobials, antifertility drugs, antibiotics, antacids, antihistamine – their meaning and common examples.Chemicals in food – Preservatives, artificial sweetening agents – common examples.Cleansing agents – Soaps and detergents, cleansing action.
28 Principles Related to Practical Chemistry Detection of extra elements (N,S, halogens) in organic compounds; Detection of the following functional groups: hydroxyl (alcoholic and phenolic), carbonyl (aldehyde and ketone), carboxyl and amino groups in organic compounds.• Chemistry involved in the preparation of the following:Inorganic compounds: Mohr’s salt, potash alum. Organic compounds: Acetanilide, p nitroacetanilide, aniline yellow, iodoform.•Chemistry involved in the titrimetric exercises -Acids bases and the use of indicators, oxalic-acid vs KMnO,, Mohr’s salt vs KMnO,.•Chemical principles involved in the qualitative salt analysis:Cations – Pb2+, Cu!+, Af,+, Fe1+, Zn2+, Ni2+, Ca2+, Ba2+,Mg2+, nh;.Anions- CO,”, S2~, SO4″, NO”, NO~2, Cf, Br”, I” . (Insoluble salts excluded).•Chemical principles involved in the following experiments:1. Enthalpy of solution of CuS042. Enthalpy of neutralization of strong acid and strong base.3. Preparation of lyophilic and lyophobic sols.4. Kinetic study of reaction of iodide ion with hydrogen peroxide at room temperature. 

 

JEE MAIN MATHS SYLLABUS

S.No.UnitsTopics
1Sets, Relations and FunctionsSets and their representation; Union, intersection and complement of sets and their algebraic properties; Power set; Relation, Types of relations, equivalence relations, functions;, one-one, into and onto functions, composition of functions,
2Complex Numbers and Quadratic EquationsComplex numbers as ordered pairs of reals, Representation of complex numbers in the form a+ib and their representation in a plane, Argand diagram, algebra of complex numbers, modulus and argument (or amplitude) of a complex number, square root of a complex number, triangle inequality, Quadratic equations in real and complex number system and their solutions. Relation between roots and co-efficients, nature of roots, formation of quadratic equations with given roots.
3Matrices and DeterminantsMatrices, algebra of matrices, types of matrices, determinants and matrices of order two and three. Properties of determinants, evaluation of determinants, area of triangles using determinants. Adjoint and evaluation of inverse of a square matrix using determinants and elementary transformations, Test of consistency and solution of simultaneous linear equations in two or three variables using determinants and matrices.
4Permutations And CombinationsFundamental principle of counting, permutation as an arrangement and combination as selection, Meaning of P (n,r) and C (n,r), simple applications.
5Mathematical InductionPrinciple of Mathematical Induction and its simple applications.
6Binomial Theorem and its Simple ApplicationsBinomial theorem for a positive integral index, general term and middle term, properties of Binomial coefficients and simple applications.
7Sequences and SeriesArithmetic and Geometric progressions, insertion of arithmetic, geometric means between two given numbers. Relation between A.M. and G.M. Sum upto n terms of special series: S n, S n2, Sn3. Arithmetico-Geometric progression.
8Limit, Continuity and DifferentiabilityReal – valued functions, algebra of functions, polynomials, rational, trigonometric, logarithmic and exponential functions, inverse functions. Graphs of simple functions. Limits, continuity and differentiability. Differentiation of the sum, difference, product and quotient of two functions. Differentiation of trigonometric, inverse trigonometric, logarithmic, exponential, composite and implicit functions; derivatives of order upto two. Rolle’s and Lagrange’s Mean Value Theorems. Applications of derivatives: Rate of change of quantities, monotonic – increasing and decreasing functions, Maxima and minima of functions of one variable, tangents and normals.
9Integral CalculusIntegral as an anti – derivative. Fundamental integrals involving algebraic, trigonometric, exponential and logarithmic functions. Integration by substitution, by parts and by partial fractions. Integration using trigonometric identities.Integral as limit of a sum. Fundamental Theorem of Calculus. Properties of definite integrals. Evaluation of definite integrals, determining areas of the regions bounded by simple curves in standard form. 
10Differential EquationsOrdinary differential equations, their order and degree. Formation of differential equations. Solution of differential equations by the method of separation of variables, solution of homogeneous and linear differential equations.
11Co-ordinate GeometryCartesian system of rectangular co-ordinates 10 in a plane, distance formula, section formula, locus and its equation, translation of axes, slope of a line, parallel and perpendicular lines, intercepts of a line on the coordinate axes.Straight linesVarious forms of equations of a line, intersection of lines, angles between two lines, conditions for concurrence of three lines, distance of a point from a line, equations of internal and external bisectors of angles between two lines, coordinates of centroid, orthocentre and circumcentre of a triangle, equation of family of lines passing through the point of intersection of two lines.Circles, conic sectionsStandard form of equation of a circle, general form of the equation of a circle, its radius and centre, equation of a circle when the end points of a diameter are given, points of intersection of a line and a circle with the centre at the origin and condition for a line to be tangent to a circle, equation of the tangent. Sections of cones, equations of conic sections (parabola, ellipse and hyperbola) in standard forms, condition for y = mx + c to be a tangent and point (s) of tangency.
12Three Dimensional GeometryCoordinates of a point in space, distance between two points, section formula, direction ratios and direction cosines, angle between two intersecting lines. Skew lines, the shortest distance between them and its equation. Equations of a line and a plane in different forms, intersection of a line and a plane, coplanar lines.
13Vector AlgebraVectors and scalars, addition of vectors, components of a vector in two dimensions and three dimensional space, scalar and vector products, scalar and vector triple product.
14Statistics and ProbabilityMeasures of Dispersion: Calculation of mean, median, mode of grouped and ungrouped data calculation of standard deviation, variance and mean deviation for grouped and ungrouped data.Probability: Probability of an event, addition and multiplication theorems of probability, Baye’s theorem, probability distribution of a random variate, Bernoulli trials and Binomial distribution.
15TrigonometryTrigonometrical identities and equations. Trigonometrical functions. Inverse trigonometrical functions and their properties. Heights and Distances
16Mathematical ReasoningStatements, logical operations and, or, implies, implied by, if and only if. Understanding of tautology, contradiction, converse and contrapositive.

 

JEE Main Syllabus 2021 – Paper 2 (Aptitude Test B. Arch/ B.Planning)

Part IAwareness of persons, places, Buildings, Materials. Objects, Texture related to Architecture and build—environment. Visualising three-dimensional objects from two-dimensional drawings. Visualising. different sides of three-dimensional objects. Analytical Reasoning Mental Ability (Visual, Numerical and Verbal).
Part IIThree dimensional – perception: Understanding and appreciation of scale and proportion of objects, building forms and elements, colour texture, harmony and contrast. Design and drawing of geometrical or abstract shapes and patterns in pencil. Transformation of forms both 2 D and 3 D union, subtraction, rotation, development of surfaces and volumes, Generation of Plan, elevations and 3 D views of objects. Creating two dimensional and three dimensional compositions using given shapes and forms.Sketching of scenes and activities from memory of urbanscape (public space, market, festivals, street scenes, monuments, recreational spaces, ect.), landscape (river fronts, jungles, trees, plants, etc.) and rural life.
Part III (Planning)General Awareness regarding development issues, government programs/schemes etc., Comprehension, critical thinking and analytical skills, graphs, charts and map reading skills, simple statistics, CBSE class X Social Sciences topics.

Leave a Reply

×

Hello!

Click one of our representatives below to chat on WhatsApp or send us an email to info@vidhyarthidarpan.com

×