SYLLABUS AND EXAMINATION PLANING FOR JEE ADVANCED

JOINT ENTRANCE EXAMINATION

Joint Entrance Examination (JEE) is an engineering entrance examination conducted for admission to various engineering colleges in India. It is constituted by two different examinations – JEE Main and JEE Advanced. The exams are of the objective pattern. JEE Advanced is regarded internationally as one of the most challenging undergraduate admission tests.

The Joint Seat Allocation Authority (JoSAA) conducts the joint admission process for a total of 23 Indian Institute of Technology campuses, 32 National Institute of Technology campuses, 18 Indian Institute of Information Technology campuses, Indian School of Mines and 19 other Government Funded Technical Institutes (GFTIs) based on the rank obtained by a student in JEE Mains and JEE Advanced.

JEE ADVANCED EXAM PATTERN:

Normally, the questions asked in the JEE Advanced paper are quite tough and quite tricky. The exam is further designed to judge not just theoretical knowledge but also reasoning ability, comprehension skills and analytical power of the students. Therefore, it is important to get familiar with the exam and the question paper early on.

The exam is held in an online mode (computer-based test) where students need to have a basic knowledge about the working of a computer and the mouse. Candidates have to use the mouse to click on the right option as the answer.

As mentioned above, the exam consists of two papers viz. paper 1 and paper 2. JEE Advanced Paper 1 and Paper 2 further constitute a total of 54 questions each. The paper is also divided into three sections: Physics, Chemistry and Mathematics, each having 18 questions. In total, the exam is of 306 mark where each paper carries a total of 183 marks. The duration of each paper is 3 hours and is conducted in either Hindi or English medium. During the exam day, paper 1 usually begins at 09:00 am and goes on till 12:00 pm. Paper 2  starts from 2:00 pm to 05:00 pm.

JEE Advanced Paper 1 pattern (Same for Physics, Chemistry and Mathematics)

Section Types of questions No. of questions Maximum Marks
Section 1 MCQs with one or more than one correct answer 6 24
Section 2 Numerical value answer type questions 8 24
Section 3 Paragraph based questions (2 paragraphs, each having 2 MCQs with one correct answer only) 4 12

 

JEE Advanced Paper 2 pattern (Same for Physics, Chemistry and Mathematics)

Section Types of questions No. of questions Maximum Marks
Section 1 MCQs with one or more than one correct answer 6 24
Section 2 Numerical value answer type questions 8 24
Section 3 Matching type questions with 4 options 4 12

 

:SYLLABUS OF EXAMINATION:

JEE ADVANCED PHYSICS SYLLABUS:

General 

Units and dimensions, dimensional analysis; least count, significant figures; Methods of  measurement and error analysis for physical quantities pertaining to the following experiments: Experiments based on using Vernier calipers and screw gauge  (micrometer), Determination of g using simple pendulum, Young’s modulus by Searle’s  method, Specific heat of a liquid using calorimeter, focal length of a concave mirror and  a convex lens using uv method, Speed of sound using resonance column, Verification of  Ohm’s law using voltmeter and ammeter, and specific resistance of the material of a wire  using meter bridge and post office box. 

Mechanics 

Kinematics in one and two dimensions (Cartesian coordinates only), projectiles; Uniform  circular motion; Relative velocity. Newton’s laws of motion; Inertial and uniformly accelerated frames of reference; Static  and dynamic friction; Kinetic and potential energy; Work and power; Conservation of linear momentum and mechanical energy.  Systems of particles; Centre of mass and its motion; Impulse; Elastic and inelastic  collisions.  

Law of gravitation; Gravitational potential and field; Acceleration due to gravity; Motion  of planets and satellites in circular orbits; Escape velocity. Rigid body, moment of inertia, parallel and perpendicular axes theorems, moment of  inertia of uniform bodies with simple geometrical shapes; Angular momentum; Torque; Conservation of angular momentum; Dynamics of rigid bodies with fixed axis of rotation; Rolling without slipping of rings, cylinders and spheres; Equilibrium of rigid bodies;  Collision of point masses with rigid bodies. Linear and angular simple harmonic motions. 

Hooke’s law, Young’s modulus.  Pressure in a fluid; Pascal’s law; Buoyancy; Surface energy and surface tension, capillary  rise; Viscosity (Poiseuille’s equation excluded), Stoke’s law; Terminal velocity, Streamline flow, equation of continuity, Bernoulli’s theorem and its applications.  Wave motion (plane waves only), longitudinal and transverse waves, superposition of waves; Progressive and stationary waves; Vibration of strings and air columns; Resonance; Beats; Speed of sound in gases; Doppler effect (in sound). 

Thermal physics 

Thermal expansion of solids, liquids and gases; Calorimetry, latent heat; Heat conduction  in one dimension; Elementary concepts of convection and radiation; Newton’s law of cooling; Ideal gas laws; Specific heats (Cv and Cp for monoatomic and diatomic gases); Isothermal and adiabatic processes, bulk modulus of gases; Equivalence of heat and  work; First law of thermodynamics and its applications (only for ideal gases); Blackbody radiation: absorptive and emissive powers; Kirchhoff’s law; Wien’s displacement law,  Stefan’s law. 

Electricity and magnetism 

Coulomb’s law; Electric field and potential; Electrical potential energy of a system of  point charges and of electrical dipoles in a uniform electrostatic field; Electric field lines;  Flux of electric field; Gauss’s law and its application in simple cases, such as, to find field due to infinitely long straight wire, uniformly charged infinite plane sheet and  uniformly charged thin spherical shell. 

Capacitance; Parallel plate capacitor with and without dielectrics; Capacitors in series  and parallel; Energy stored in a capacitor. Electric current; Ohm’s law; Series and parallel arrangements of resistances and cells;  

Kirchhoff’s laws and simple applications; Heating effect of current.  

Biot–Savart’s law and Ampere’s law; Magnetic field near a current-carrying straight  wire, along the axis of a circular coil and inside a long straight solenoid; Force on a  moving charge and on a current-carrying wire in a uniform magnetic field. Magnetic moment of a current loop; Effect of a uniform magnetic field on a current loop; 

Moving coil galvanometer, voltmeter, ammeter and their conversions. 

Electromagnetic induction: Faraday’s law, Lenz’s law; Self and mutual inductance; RC,  LR and LC circuits with d.c. and a.c. sources. 

Optics 

Rectilinear propagation of light; Reflection and refraction at plane and spherical surfaces;  Total internal reflection; Deviation and dispersion of light by a prism; Thin lenses; Combinations of mirrors and thin lenses; Magnification. 

Wave nature of light: Huygen’s principle, interference limited to Young’s double-slit  experiment. 

Modern physics 

Atomic nucleus; α, β and γ radiations; Law of radioactive decay; Decay constant; Half-  life and mean life; Binding energy and its calculation; Fission and fusion processes; 

Energy calculation in these processes.  Photoelectric effect; Bohr’s theory of hydrogen-like atoms; Characteristic and continuous X-rays, Moseley’s law; de Broglie wavelength of matter waves.

JEE ADVANCED CHEMISTRY SYLLABUS

Physical chemistry 

General topics 

Concept of atoms and molecules; Dalton’s atomic theory; Mole concept; Chemical  formulae; Balanced chemical equations; Calculations (based on mole concept) involving  common oxidation-reduction, neutralisation, and displacement reactions; Concentration in terms of mole fraction, molarity, molality and normality. 

Gaseous and liquid states 

Absolute scale of temperature, ideal gas equation; Deviation from ideality, van der Waals equation; Kinetic theory of gases, average, root mean square and most probable velocities and their relation with temperature; Law of partial pressures; Vapour pressure; Diffusion of gases. 

Atomic structure and chemical bonding 

Bohr model, spectrum of hydrogen atom, quantum numbers; Wave-particle duality, de Broglie hypothesis; Uncertainty principle; Qualitative quantum mechanical picture of hydrogen atom, shapes of s, p and d orbitals; Electronic configurations of elements (up to atomic number 36); Aufbau principle; Pauli’s exclusion principle and Hund’s rule; Orbital overlap and covalent bond; Hybridisation involving s, p and d orbitals only; Orbital energy diagrams for homonuclear diatomic species; Hydrogen bond; Polarity in molecules, dipole moment (qualitative aspects only); VSEPR model and shapes of molecules (linear, angular, triangular, square planar, pyramidal, square pyramidal, trigonal bipyramidal, tetrahedral and octahedral). 

Energetics 

First law of thermodynamics; Internal energy, work and heat, pressure-volume work; Enthalpy, Hess’s law; Heat of reaction, fusion and evaporation; Second law of thermodynamics; Entropy; Free energy; Criterion of spontaneity. 

Chemical equilibrium 

Law of mass action; Equilibrium constant, Le Chatelier’s principle (effect of concentration, temperature and pressure); Significance of ΔG and ΔG0 in chemical equilibrium; Solubility product, common ion effect, pH and buffer solutions; Acids and bases (Bronsted and Lewis concepts); Hydrolysis of salts. 

Electrochemistry 

Electrochemical cells and cell reactions; Standard electrode potentials; Nernst equation and its relation to ΔG; Electrochemical series, emf of galvanic cells; Faraday’s laws of electrolysis; Electrolytic conductance, specific, equivalent and molar conductivity, Kohlrausch’s law; Concentration cells. 

Chemical kinetics 

Rates of chemical reactions; Order of reactions; Rate constant; First order reactions; Temperature dependence of rate constant (Arrhenius equation). 

Solid state 

Classification of solids, crystalline state, seven crystal systems (cell parameters a, b, c, α, β, γ), close packed structure of solids (cubic), packing in fcc, bcc and hcp lattices; Nearest neighbours, ionic radii, simple ionic compounds, point defects. 

Solutions 

Raoult’s law; Molecular weight determination from lowering of vapour pressure, elevation of boiling point and depression of freezing point. 

Surface chemistry 

Elementary concepts of adsorption (excluding adsorption isotherms); Colloids: types, methods of preparation and general properties; Elementary ideas of emulsions, surfactants and micelles (only definitions and examples). 

Nuclear chemistry 

Radioactivity: isotopes and isobars; Properties of α, β and γ rays; Kinetics of radioactive decay (decay series excluded), carbon dating; Stability of nuclei with respect to proton- neutron ratio; Brief discussion on fission and fusion reactions. 

Inorganic chemistry 

Isolation/preparation and properties of the following non-metals 

Boron, silicon, nitrogen, phosphorus, oxygen, sulphur and halogens; Properties of allotropes of carbon (only diamond and graphite), phosphorus and sulphur. 

Preparation and properties of the following compounds 

Oxides, peroxides, hydroxides, carbonates, bicarbonates, chlorides and sulphates of sodium, potassium, magnesium and calcium; Boron: diborane, boric acid and borax; Aluminium: alumina, aluminium chloride and alums; Carbon: oxides and oxyacid (carbonic acid); Silicon: silicones, silicates and silicon carbide; Nitrogen: oxides, 

oxyacids and ammonia; Phosphorus: oxides, oxyacids (phosphorus acid, phosphoric acid) and phosphine; Oxygen: ozone and hydrogen peroxide; Sulphur: hydrogen sulphide, oxides, sulphurous acid, sulphuric acid and sodium thiosulphate; Halogens: hydrohalic acids, oxides and oxyacids of chlorine, bleaching powder; Xenon fluorides. 

Transition elements (3rd series) 

Definition, general characteristics, oxidation states and their stabilities, colour (excluding the details of electronic transitions) and calculation of spin-only magnetic moment; Coordination compounds: nomenclature of mononuclear coordination compounds, cis-trans and ionisation isomerisms, hybridization and geometries of mononuclear coordination compounds (linear, tetrahedral, square planar and octahedral). 

Preparation and properties of the following compounds 

Oxides and chlorides of tin and lead; Oxides, chlorides and sulphates of Fe2+, Cu2+ and Zn2+; Potassium permanganate, potassium dichromate, silver oxide, silver nitrate, silver thiosulphate. 

Ores and minerals 

Commonly occurring ores and minerals of iron, copper, tin, lead, magnesium, aluminium, zinc and silver. 

Extractive metallurgy 

Chemical principles and reactions only (industrial details excluded); Carbon reduction method (iron and tin); Self reduction method (copper and lead); Electrolytic reduction method (magnesium and aluminium); Cyanide process (silver and gold). 

Principles of qualitative analysis 

Groups I to V (only Ag+, Hg2+, Cu2+, Pb2+, Bi3+, Fe3+, Cr3+, Al3+, Ca2+, Ba2+, Zn2+, Mn2+ and Mg2+); Nitrate, halides (excluding fluoride), sulphate and sulphide. 

 

Organic chemistry 

Concepts 

Hybridisation of carbon; σ and π-bonds; Shapes of simple organic molecules; Structural and geometrical isomerism; Optical isomerism of compounds containing up to two asymmetric centres, (R,S and E,Z nomenclature excluded); IUPAC nomenclature of simple organic compounds (only hydrocarbons, mono-functional and bi-functional compounds); Conformations of ethane and butane (Newman projections); Resonance and hyperconjugation; Keto-enol tautomerism; Determination of empirical and molecular formulae of simple compounds (only combustion method); Hydrogen bonds: definition and their effects on physical properties of alcohols and carboxylic acids; Inductive and resonance effects on acidity and basicity of organic acids and bases; Polarity and inductive effects in alkyl halides; Reactive intermediates produced during homolytic and heterolytic bond cleavage; Formation, structure and stability of carbocations, carbanions and free radicals. 

Preparation, properties and reactions of alkanes 

Homologous series, physical properties of alkanes (melting points, boiling points and density); Combustion and halogenation of alkanes; Preparation of alkanes by Wurtz reaction and decarboxylation reactions. 

Preparation, properties and reactions of alkenes and alkynes 

Physical properties of alkenes and alkynes (boiling points, density and dipole moments); Acidity of alkynes; Acid catalysed hydration of alkenes and alkynes (excluding the stereochemistry of addition and elimination); Reactions of alkenes with KMnO4 and ozone; Reduction of alkenes and alkynes; Preparation of alkenes and alkynes by elimination reactions; Electrophilic addition reactions of alkenes with X2, HX, HOX and H2O (X=halogen); Additional reactions of alkynes; Metal acetylides. 

Reactions of benzene 

Structure and aromaticity; Electrophilic substitution reactions: halogenation, nitration, sulphonation, Friedel-Crafts alkylation and acylation; Effect of o-, m– and p-directing groups in monosubstituted benzenes. 

Phenols 

Acidity, electrophilic substitution reactions (halogenation, nitration and sulphonation); Reimer-Tieman reaction, Kolbe reaction. 

Characteristic reactions of the following (including those mentioned above) 

Alkyl halides: rearrangement reactions of alkyl carbocation, Grignard reactions, nucleophilic substitution reactions; Alcohols: esterification, dehydration and oxidation, reaction with sodium, phosphorus halides, ZnCl2/concentrated HCl, conversion of alcohols into aldehydes and ketones; Ethers: Preparation by Williamson’s Synthesis; Aldehydes and Ketones: oxidation, reduction, oxime and hydrazone formation; aldol condensation, Perkin reaction; Cannizzaro reaction; haloform reaction and nucleophilic addition reactions (Grignard addition); Carboxylic acids: formation of esters, acid chlorides and amides, ester hydrolysis; Amines: basicity of substituted anilines and aliphatic amines, preparation from nitro compounds, reaction with nitrous acid, azo coupling reaction of diazonium salts of aromatic amines, Sandmeyer and related reactions of diazonium salts; carbylamine reaction; Haloarenes: nucleophilic aromatic substitution  in haloarenes and substituted haloarenes (excluding Benzyne mechanism and Cine substitution). 

Carbohydrates 

Classification; mono- and di-saccharides (glucose and sucrose); Oxidation, reduction, glycoside formation and hydrolysis of sucrose. 

Amino acids and peptides 

General structure (only primary structure for peptides) and physical properties. 

Properties and uses of some important polymers 

Natural rubber, cellulose, nylon, teflon and PVC. 

Practical organic chemistry 

Detection of elements (N, S, halogens); Detection and identification of the following functional groups: hydroxyl (alcoholic and phenolic), carbonyl (aldehyde and ketone), carboxyl, amino and nitro; Chemical methods of separation of mono-functional organic compounds from binary mixtures.

JEE ADVANCED MATHS SYLLABUS

Algebra 

Algebra of complex numbers, addition, multiplication, conjugation, polar representation,  properties of modulus and principal argument, triangle inequality, cube roots of unity, geometric interpretations. 

Quadratic equations with real coefficients, relations between roots and coefficients,  formation of quadratic equations with given roots, symmetric functions of roots.  

Arithmetic, geometric and harmonic progressions, arithmetic, geometric and harmonic  means, sums of finite arithmetic and geometric progressions, infinite geometric series,  sums of squares and cubes of the first n natural numbers. 

Logarithms and their properties. 

Permutations and combinations, binomial theorem for a positive integral index, properties of binomial coefficients. 

Matrices 

Matrices as a rectangular array of real numbers, equality of matrices, addition,  multiplication by a scalar and product of matrices, transpose of a matrix, determinant of  a square matrix of order up to three, inverse of a square matrix of order up to three, properties of these matrix operations, diagonal, symmetric and skew-symmetric matrices  and their properties, solutions of simultaneous linear equations in two or three variables. 

Probability 

Addition and multiplication rules of probability, conditional probability, Bayes Theorem,  independence of events, computation of probability of events using permutations and combinations. 

Trigonometry 

Trigonometric functions, their periodicity and graphs, addition and subtraction formulae,  formulae involving multiple and sub-multiple angles, general solution of trigonometric equations. 

Relations between sides and angles of a triangle, sine rule, cosine rule, half-angle formula  and the area of a triangle, inverse trigonometric functions (principal value only).  

Analytical geometry 

Two dimensions: Cartesian coordinates, distance between two points, section formulae,  shift of origin. 

Equation of a straight line in various forms, angle between two lines, distance of a point  from a line; Lines through the point of intersection of two given lines, equation of the bisector of the angle between two lines, concurrency of lines; Centroid, orthocentre,  incentre and circumcentre of a triangle. 

Equation of a circle in various forms, equations of tangent, normal and chord.  Parametric equations of a circle, intersection of a circle with a straight line or a circle,  equation of a circle through the points of intersection of two circles and those of a circle and a straight line. 

Equations of a parabola, ellipse and hyperbola in standard form, their foci, directrices and  eccentricity, parametric equations, equations of tangent and normal.  

Locus problems.  Three dimensions: Direction cosines and direction ratios, equation of a straight line in  space, equation of a plane, distance of a point from a plane. 

Differential calculus 

Real valued functions of a real variable, into, onto and one-to-one functions, sum,  difference, product and quotient of two functions, composite functions, absolute value,  polynomial, rational, trigonometric, exponential and logarithmic functions. Limit and continuity of a function, limit and continuity of the sum, difference, product  and quotient of two functions, L’Hospital rule of evaluation of limits of functions. Even and odd functions, inverse of a function, continuity of composite functions,  intermediate value property of continuous functions.  

Derivative of a function, derivative of the sum, difference, product and quotient of two  functions, chain rule, derivatives of polynomial, rational, trigonometric, inverse trigonometric, exponential and logarithmic functions. 

Derivatives of implicit functions, derivatives up to order two, geometrical interpretation  of the derivative, tangents and normals, increasing and decreasing functions, maximum and minimum values of a function, Rolle’s theorem and Lagrange’s mean value theorem. 

Integral calculus 

Integration as the inverse process of differentiation, indefinite integrals of standard  functions, definite integrals and their properties, fundamental theorem of integral calculus. 

Integration by parts, integration by the methods of substitution and partial fractions,  application of definite integrals to the determination of areas involving simple curves. Formation of ordinary differential equations, solution of homogeneous differential  equations, separation of variables method, linear first order differential equations.  

Vectors 

Addition of vectors, scalar multiplication, dot and cross products, scalar triple products  and their geometrical interpretations.

JEE ADVANCED ARCHITECTURE APTITUDE TEST SYLLABUS

Freehand drawing 

This would comprise of simple drawing depicting the total object in its right form and proportion, surface texture, relative location and details of its component parts in appropriate scale. Common domestic or day-to-day life usable objects like furniture, equipment, etc., from memory. 

Geometrical drawing 

Exercises in geometrical drawing containing lines, angles, triangles, quadrilaterals, polygons, circles, etc. Study of plan (top view), elevation (front or side views) of simple solid objects like prisms, cones, cylinders, cubes, splayed surface holders, etc. 

Three-dimensional perception 

Understanding and appreciation of three-dimensional forms with building elements, colour, volume and orientation. Visualization through structuring objects in memory. 

Imagination and aesthetic sensitivity 

Composition exercise with given elements. Context mapping. Creativity check through innovative uncommon test with familiar objects. Sense of colour grouping or application. 

Architectural awareness 

General interest and awareness of famous architectural creations – both national and international, places and personalities (architects, designers, etc.) in the related domain.

Leave a Reply

×

Hello!

Click one of our representatives below to chat on WhatsApp or send us an email to info@vidhyarthidarpan.com

×